Eagle FISHEASY Especificações descarregar pdf (Página 9)

NOTE:

Some aluminum boats with strakes or ribs on the outside of the

hull create large amounts of turbulence at high speed. These boats

typically have large outboard motors capable of propelling the boat

at speeds faster than 35 mph. Typically, a good transom location on

aluminum boats is between the ribs closest to the engine.

3. The transducer should be installed with its face pointing straight

down, if possible.

4. If the transducer is mounted on the transom, make sure it doesn't

interfere with the trailer or hauling of the boat. Also, don't mount it

closer than approximately one foot from the engine's lower unit. This

will prevent cavitation (bubble) interference with propeller operation.

5. If possible, route the transducer cable away from other wiring on the

boat. Electrical noise from engine wiring, bilge pumps and aerators can

be displayed on the sonar's screen. Use caution when routing the trans-

ducer cable around these wires.

Good and poor transducer locations.

CAUTION: Clamp the trans-

ducer cable to transom near

the transducer. This will help

revent the transducer from

entering the boat if it is

knocked off at high speed.

Good location

Poor angle

Poor location

Good

location

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 167 168

Comentários a estes Manuais

BryanGluth 07 Apr 2024 | 21:14:18

Hello! Crazy discounts, hurry up! We are Drop Dead Studio and our goal is to help companies achieve impressive sales results through automated marketing. I. We sell fresh databases for GSA Search Engine Ranker. • The databases are updated monthly through 24/7 parsing and by connecting purchased databases from other sources. • You have the option to purchase a one-time fresh database or pay for a lifetime subscription for updates. ATTENTION! 40% discount only until 04/10/2024! When ap

Eagle FISHEASY Especificações Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com não Eagle FISHEASY