Eagle 105 Manual de Instruções descarregar pdf (Página 12)

Weather Eagle® 105-110 Instruction Manual Page-12-

newest alert. The playback audio is played through the speaker on the WEATHER

EAGLE® and out the muted audio RCA connector. An LED will flash quickly when the

record chip is recording or playing back an alert. The play switch can be remotely

controlled through the external connector on the rear of the WEATHER EAGLE®. The

WEATHER EAGLE® will automatically reset after the playing of the 4 minutes of audio.

Pressing the Play button when the WEATHER EAGLE® is in the live mode will

automatically mute the live audio. Pressing and holding in the Play button for about 4

seconds will place the WEATHER EAGLE® in the record test mode. 4 minutes of audio

will be recorded and then played back. To stop the record test, power down and power

up the unit.

15) INTERFACE CONNECTIONS

Every attempt has been made to include all the circuitry to make the interface between

the WEATHER EAGLE®and other communications systems as easy as possible. The

connections are made by soldering wires (about 24 gauge) to pins on the 15 pin rear

connector. BE CAREFUL NOT TO SHORT THE WIRES. REPAIRS DUE TO

CUSTOMER CONNECTIONS ARE NOT COVERED BY THE WARRANTY!!

The DB15 has the following connections:

1 Remote Manual switch (active high +5vdc)

2 Remote Scan switch (active high +5vdc)

3 Remote Reset switch (active high +5vdc)

4 Remote Live switch (active high +5vdc)

5 Relay common

6 Relay normally open

7 Relay normally closed

8 Logic In (active high + 5vdc) to mute/unmute the receiver

9 Unmuted audio out

1 2 ... 7 8 9 10 11 12 13 14 15 16

Sem comentários

Eagle 105 Manual de Instruções Página 12